|
Therma-Floor® Delivers the Heat... ... acting as the thermal mass in a radiant floor heating system. |
|
|
|||||||||||||||||||||||||||||||||||||||||
|
Gyp-Crete 2000®/3.2K Data Sheet
|
||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Product Description: |
|
Technical Data:
| Compressive Strength: | Typical range of 2000 psi to 3200 psi (14 MPa to 22 MPa) |
|---|---|
| 'K' Factor: | 5.15 Btu/(h·ft²·ºF) (.7416 W/[m·ºC]) |
| Specific Heat: | .222 Btu/(lb·ºF) at 85ºF (.9301 kJ[kg·ºC] at 29.44ºC) |
| Weight: | At 3/4", less than 7.2 lbs./sq.ft. (At 19 mm, less than 35.2 kg/m²) |
| Dry Density: | 115 lbs./ft.³ (1840kg/m³) |
| Point Loading: | Typical loading of up to 2,500 lbs. on a 1" (1135 kg on a 25.4 mm) diameter disc |
| Surface Burning Characteristics: | Flame spread: 0 Fuel contributed: 0 Smoke density: 0 |
| VOC: | 0.12 mg/m³ |
'Green' Information:
| USGBC LEED Credit Areas | |||
| Project | Credit | Category | How Requirement is Fulfilled |
| Indoor Environmental Quality | EQ 3.2 | Construction Indoor Air Quality Management Plan |
GREENGUARD Certified (Field testing MUST be completed prior to claiming credit) |
| Materials & Resources | MR 4.1 ‑ 4.2 | Recycled Content | Fly Ash |
| MR 5.1 - 5.2 | Local/Reg. Materials | Manufactured in Blue Rapids, KS 66411; Las Vegas, NV 89035; Camden, NJ 08103; Brunswick, GA 31520; Job site manufactured with local sand & water | |
Gyp-Crete 2000/3.2K is GREENGUARD Indoor Air Quality Certified®
For additional information on GREENGUARD, the USGBC, and Gyp-Crete 2000/3.2K's qualifications for earning LEED points, please see our "Green" page.
| Code Listings: |
|